Sew Yeah services ALL makes and models of sewing machine! Please see the tables below for information. Please call or stop by the store to find out the current waiting time and with any questions. (702) 586-8687


BASIC SERVICE : $69
We recommend that you have your sewing machine serviced annually.  Please see table below for what is included in the basic service.  When you purchase a machine through Sew Yeah, the first year service is included free of charge.
 
*Internal & External Cleaning *Bobbin Case Tension *Bobbin Winding
*Internal Lubrication *Top Tension *Thread Regulator
*Perform Function Check *Straight Stitch *Food Control / Cable
*Zig Zag Stitch *Test Sew Straight and Zig Zag  

If you are having issues with you machine or you have a computerized sewing machine, we recommend our next level or service which is more comprehensive.

ADVANCED SERVICE: $129
This comprehensive service checks for proper function and wear of all parts of your machine!
   
CHECK FOR PROPER FUNCTION AND WEAR OF THE FOLLOWING:   
 *All Transmission Belts  *Basting  *Bobbin Winder *Tension Unit
 *Feed Dog  *Spool Holder  *Hand Wheel / Release  * Hook, Driver, Race and Race Cover
 *Idler Pulley  *Interface Function Check  *Motor / Motor Brushes  *Needle Bar
 *Needle Threader  *Presser Foot Bar  *Electrical Connections/ Safety of Cables  
 CHECK AND ADJUST AS NEEDED:   
 *Basting  *BSR Function Test  *Buttonhole  *Embroidery Module Service
 *Multi Directional Pattern Balance  *Software and Firmware Updates  *Speed Limitation  *Zig Zag Swing
 *Entire Machine Function Test  *Feed Dog Height  *Free Hand System  *Hook and Needle Timing
 *Needle Front to Back  *Needle Height  *Needle Hook Clearance  *Needle Hook Clearance
*Needle Position and Distribution *Machine Lights *Test sew  

Sew Yeah also services your overlocker machines!

OVERLOCKER (SERGER) SERVICE: $69
*Cover Stitch *Needle Plate *Presser Foot
*Tension Calibration *Upper and Lower Knife *Upper and Lower Loopers
*Entire Machine Timing *Test Sew  


Should your machine require replacement of parts, removal of entire modules, motors or circuit boards or complete disassembly of machine, this will be billed at an hourly rate of $60 per hour plus the cost of replacement parts. We bill in 15 minute increments.  All work will be approved by the machine owner prior to parts being ordered and replaced.